2 POST CAR HOIST, 4.5 TONNE, SYMMETRICAL, 415V
Part No.: #505XPR10S415V$5,690.00 NZD (Excl. GST)
4.5-TONNE 415V 2-POST CAR HOIST WITH LOW PROFILE ARMS MADE BY BENDPAK Standard columns with symmetrical arms.
Also available in 230V AC, 50Hz.
Features exclusive Screw pad arms that accommodate lowered sports cars and vehicles with exclusive lift points located on the extreme outer edges of the chassis. This super-industrial-strength hoist has got it all: cutting-edge technology, top of the line materials, design that’s ahead of its time and a 4,536kgs. lifting capacity. Fits in shops with ceilings higher than 3660cm, and won’t crowd your floor while you work beneath a vehicle.
Features:
Also available in 230V AC, 50Hz.
Features exclusive Screw pad arms that accommodate lowered sports cars and vehicles with exclusive lift points located on the extreme outer edges of the chassis. This super-industrial-strength hoist has got it all: cutting-edge technology, top of the line materials, design that’s ahead of its time and a 4,536kgs. lifting capacity. Fits in shops with ceilings higher than 3660cm, and won’t crowd your floor while you work beneath a vehicle.
Features:
- Lift arms shown with optional foot guards
- Telescoping Screw Pad arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
- Expandable top beam accommodates wide or narrow drive-thru configuration
- Padded overhead safety shut-off bar
- Exclusive Tru-Metric arm design for more versatile arm positioning
- 30° rotated single-piece columns
- Single-point safety release
- Dual hydraulic direct-drive cylinders
- Oversized 1346mm tall carriage for superior strength and durability
- Electro-hydraulic power system
- Large, 43cm x 48cm A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 76mm
- Automatic arm restraints
- Heavy-duty 12mm aircraft-quality equaliser cables
- Oversized cable sheave diameter reduces cable fatigue
- 8-piece truck and van adapter set comes standard
- Versatile drop-in contact pads with stackable adapters
- Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
Turf Lift Accessory (Sold Seperately)
Part no. 5055174116
| |
| MODEL | XPR-10S |
|---|---|
| Lifting Capacity* | 10,000 Lbs. / 4,536 kg. |
| *Max Capacity / Front Axle | 5,000 Lbs. / 2,268 kg. |
| *Max Capacity / Rear Axle | 5,000 Lbs. / 2,268 kg. |
| A - Height Overall: | 145" / 3,683 mm* |
| B - Width Overall: (NARROW) | 132" / 3,353 mm. |
| B - Width Overall: (WIDE) | 145" / 3,683 mm. |
| C - Width Outside of Columns: (NARROW) | 126-3/4" / 3,225 mm. |
| C - Width Outside of Columns: (WIDE) | 139-3/4" / 3,555 mm. |
| D - Floor To Overhead Switch: | 141" / 3,581 mm* |
| E - Inside Columns: (NARROW) | 105.5" / 2,680 mm. |
| E - Inside Columns: (WIDE) | 118.5" / 3,010 mm. |
| F - Reach (Front Arm Min.): | 27-1/2" / 698 mm. |
| G - Reach (Front Arm Max.): | 51-1/2" / 1,308 mm. |
| H - Reach (Rear Arm Min.): | 34" / 863 mm. |
| I - Reach (Rear Arm Max.): | 54-1/2" / 1,384 mm. |
| J - Min. Pad Height: | 4.25" - 6-3/4” / 108 mm. - 171 mm. |
| K - Rise: | 69" / 1,753 mm. |
| L - Max Lift Height (Pad Only): | 73" - 75" / 1,854 - 1,905 mm. |
| M - Max Lift Height (3" Adapter): | 75.5" - 77.5" / 1,917 mm. - 1,968 mm. |
| N - Drive-Thru Clearance: (NARROW) | 93" / 2,362 mm. |
| N - Drive-Thru Clearance: (WIDE) | 106" / 2,692 mm. |
| Screw Pad Adjustment: | 2" / 51 mm. |
| Motor (**) | 220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: | 45 Seconds |
| Max Load Per Arm: | 2,500 Lbs. / 1134 Kg. |
