Non-magnetic feeler gauge (brass). Contains six 84 x 13mm brass blades for "electronic ignition" work. Length: 95mm

Contains 36 84mm x 13mm blades. Length is 92mm.

Blades are approx. 1/2" wide x 4" long.

Contains twenty six 84mm x 13mm (tappered to 6mm) blades.

Contains twenty six 100 x 13mm blades with 1" 45

Approximately 1/2" wide x 3 1/2" long. Alt. part use 3207000

Contains twenty-five 84mm x 13mm blades. Length is 92mm. Alt. part use 48068150

Brass Blade .010". Blades from .038-.889mm thickness are approx 1/2" x 3 1/2" long.

Popular standard gauge. Contains 25 3.5/16" x 1/2" (85 x 13mm) blades. Length: 3.5/8" (90mm).

Determine degree of thread and threads per inch in inches. 60° thread. 22 blades range: 4 to 32tpi, length: 2.5/8" (67mm).

55° thread. For Whitworth and British association threads. 28 blade range from 4 to 62 gauge. Length: 2.5/8" (67mm). Note: BSP & BSF threads are also 55°.

60° thread. 24 blades. Range: 0.25 to 6.00 Pitch (ISO Metric). Length: 2.5/8" (67mm)

Contains 6 most popular "electronic ignition" spark plug gapping wires . Thickness: .040" to .080" (1.02mm to 2.03mm).

Contains 22 3.5/16" x 1/2" (85 x 13mm) stepped ground blades. Length: 3.5/8" (90mm).

Contains 9 4" x 1/2" (100 x 13mm) blades with 1" x 45

24 Blade Extra Long Feeler Gauge. Contains 24 12" x 1/2" (300 x 13mm) blades. Length: 12.1/2" (320mm).

Contains 14 6" x 1/2" (150 x 13) blades with 1" x 90

Quickly identifies thread pitch or tpi. Measures both thread diameter and pitch. Drill/tap chart included.

Designed for use in corrosive work areas. Contains 17 blades 3" x 1/2" (75 x 13mm)

Range: 4-42 and 0.25 to 6mm. Combination of American National 60

4-62 and 0.25 to 6.0mm. Combination of Whitworth 55

Manufactured from stainless steel. Useful for measuring thickness of wires.

Range: .5-10mm; Graduation: .05mm. For quick measuring of slot width etc.

7.5-15mm; Concave Blades: 16; Convex Blades: 16.

Range: 1-7mm; Concave Blades: 17; Convex Blades: 17.