Universal 10 tonne Gear puller set. Alt part No. 626hgp3p. Spares available.
Removes bearings and gears. Has assorted sizes bearing puller plates cross beams and leg bolts.etc. Screw driven.
Kit with 2 bearing puller plates , cross block and 4 main rods, with hydraulic ram.
Internal/External slide hammer puller set. 3LH hammer. For bearings and seals and pressed fit parts.
8 way slide hammer set. Will pull seals bearings axles etc. Spares available.
10 ton screw type push puller with 3 cross blocks and legs etc T&E. brand.
2 or 3 jaw Int. Ext.master puller set. For cars, trucks, farm machinery etc.T&E brand
Multi purpose Bearing and Pulley Puller Set. 60 to 140mm spread T&E brand
Blind hole bearing puller and replacer set. Collets range 8 to 32 mm.
Blind Hole Bearing Puller Set. Collets 8 to 34mm. Includes 3lbs slide hammer.
Master 2/3 jaw Slide Hammer Puller Set. 5lbs hammer. With front and rear hub puller plates. Dent puller etc. T&E brand.
Basic gear and bearing puller set with cross block and worm screw. T&E brand
Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes. You also get a steering wheel pulley and fly wheel puller. Wt. 2.3kgs.
Remove press fitted pins from cylinder blocks and flywheels etc. 6 to 16mm sizes. For Imperial set refer part. 3204720
Designed to remove oil seals on transmissions, axles, differentials, power steering pumps etc. Hammer weight: 1.2kgs., Length: 350mm.
Universal Flange Puller Set. Use on Harmonic Balancers, Steering Wheels etc. T&E Tools.
Two and three way head. Internal and external use. 5lb. hammer and 530mm long. 5/8" UNF thread.
Heavy duty, for use on harmonic balancers. Bolt sizes: 3 of 3/8" UNF x 3" long; 3 of 3/8" UNC x 3" long.
HD flange puller for use on harmonic balancers etc. Diameters: 1.1/8" to 5" (28 to 125mm).
Two pulling flange plates in one set. Small plate diameter: 1" to 3 11/16" (25 to 95mm); Large plate diameter: 1 1/8" to 5" (28 to 125mm)
Universal application for removing front hubs on front wheel drive cars. Capacity: 3 1/8" to 5" stud circle (80 to 127mm), 10 ton hydraulic force.
Made from heavy gauge stell featuring an all welded construction. Set contains huge 14lb. slide hammer, claw, short hook, deep hook, door edge tool, hook and chain, straight driver, adaptor and screw.
Includes extra small 2" (50mm) capacity bearing separator, cross block puller with 2 sets of extension legs, 1.1/2" (38mm) and 2" (50mm). Also includes 2 jaw puller legs, 2" in length.
Economical and versatile model that comes with 4 pairs of multi-purpose jaws that can be reversed for use in both inside and outside pulling.