5 piece parallel extractor set. Will not expand broken fasteners. Made by Lisle USA.

Popular square tapered extractors will loosen stubborn broken fasteners. Loose sizes available.

10 sizes in this popular screw extractor set from T&E. Makes tough jobs easy.

T&E 3-22 mm sizes. CA150 Alloy steel. Removes without jamming

T&E extractor and drill guide set with drills. Instructions included. Available loose

Tapered fluted extractors. Sizes 1-6. Alt. part 3208967

Removes screws and bolts 1/4" through 1.3/8" diameter. With sharp undercut edges.

Flush type cam style 1/2" sq. drive stud remover. The tighter the stud the more firmly the tool grips. Capacity: 1/4" to 3/4" (6-19mm).

T&E roller cam action stud remover set. Alt. part refer 474FD404M or 4714211M & 4714211A.

Straight flute type, will work on left and right hand threads. Drill size is stamped on each extractor for easy use.

Sizes: 6, 8, 10 and 12mm.

Designed for removing damaged or rusted fasteners. Contains: 12, 14, 17, 19 and 21mm nut and bolt extractor sockets. 1/2" drive.

New design 3/8" dr. impact type wedge proof extractors. Made from SNCM+V molybdenum steel with heat treatment to obtain maximum hardness without braking. Sizes: 2, 3, 4, 6, 8 and 10mm. Length: 2.3/8" (16mm).

New design 1/2" dr. impact type wedge proof extractors. Made from SNCM+V molybdenum steel with heat treatment to obtain maximum hardness without braking. Sizes: 8, 10, 12, 14 and 16mm. Length: 3.1/8" (18mm).

Contains 6 and 8mm 3/8" drive stud pullers and 10 and 12mm 1/2" drive stud pullers.

Contains 1/4" & 5/16", 3/8" drive stud pullers and 3/8" & 7/16", 1/2" drive stud pullers.

Set contains: 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2" roller cam stud extractors.

Set contains: 5, 6, 7, 8, 10, 12 and 14mm roller cam stud extractor set.

The best way to remove studs without causing damage to the shanks. Collet sizes from 1/4" x 20tpi to 5/8" x 18tpi.

The best way to remove studs without causing damage to the shanks. Collet sizes from 6 x 1mm to 16 x 2mm.

Quick and easy way to remove broken screws, pipes, bolts and studs. Sizes: #1, #2, #3, #4 and #5.

Features 60° angle cutting edge with centre point to drill left handed to remove broken screws. Sizes: #1, #2 and #3.

Grips internally on pipe and tube fittings. Set consists of six sizes with range from 5mm to 30mm.

The 5 different sizes cover all size threading taps from 1/16" (1.5mm) to 1/2" (13mm).