Splits rusted hex nuts up to 7/8" (22mm) across the flats. Does not damage the bolt threads. Blade is replaceable. 4" (100mm) long.

This angled nut splitter with open end jaw is required when access to the nut from overhead is not possible.Max. capacity: 7/8" (22mm). 170mm long.

Splits rusted hex nuts up to 7/8" (22mm) across the flats. Angle head design allows tool to be used in hard to reach areas. Capacity: 7/8" (22mm). Length: 4" (100mm).

6" Nut Splitting tool,with 8mm opening. Ideal for removing seized locking clamps on tie rod adjuster sleeves, exhaust & shock absorber nuts. Length 150mm 

T&E Pneumatic 10" Nut Splitting Tool. 10" long with 3/8" (10mm) opening. Length 250mm Parker Shank.

Splits rusted hex nuts up to 1.1/16" (27mm) across the flats. Sizes: 3/8"-1/2" (9-12mm); 1/2"-5/8" (12-16mm); 5/8"-7/8" (16-22mm); 7/8"-1.1/16" (22-27mm).

Includes 2 grease ram hydraulic nut splitters that will split sized hex nuts from the smallest size up to 1.1/2" (36mm) across the flats without damage to bolt or stud thread.

Features 5 different hardened splitter bodies and specially tempered replaceable blades with a ten ton hydraulic pump.