Bearing Separator 75-110mm Tapped Holes 1/2”x16TPI UNC

Large Bearing Separator

• Remove gears, bearing cones and all other parts that puller jaws cannot reach behind. 

• The two knife edge plates are flush one side to ease the pull and reduce the risk of damage to the part. 

• Also used with the workshop’s hydraulic press.

Capacity: 3" to 4.1/4"(75mm to 110mm)

Tapped Holes: 1/2" x 16tpi

(SCM415 Hardened 42-45HRC)

Alt. part use 1751123