Tecnolux Headlight Beam Setter - Digital

*Delivery & installation not included*

Overview: 
 

• Electronic headlamp test stand with built-in camera to fully inspect and analyze all headlamps installed in the vehicle.
• Digital display for all lights (including Matrix)
• 2 lasers to quickly set the adjustment point
• Digital luxury meter
• Video analysis is "good" or "bad" - so it's very convenient to work with

 

Features:
 

• The aluminum housing is a coordinating balancing system: the operator can move the optical control box in both directions with a gentle touch
• The optical box contains a pure glass lens with a diameter of 230 mm: the design specifications provide for the control of the deviation of the light mechanical position by 1 cm / 10 meters
• The optical box has both an RS232Port and a USB port
• Aluminum and stainless steel body with three height-adjustable castors for easy work on any base
• Applicability: halogen, xenon, LED, low beam, high beam, fog light
• Type of Headlights : European left / right steering wheel (UK, USA, Japan)
• Languages: 5 Standard + 3 added on request.
• Integrated printer to print the report and deliver it to the customer
• Software update via USB or RS232 connection and available via WiFi, Bluetooth
• The sensor is mounted inside the optical box and reads the working height from the floor to the center of the optical box lens. This value is automatically sent to the electronic board so that the value can be recorded during the measurement
• The electronic board has a chip accelerometer that locks the 0 position. When HBT is placed on the work area, the chip determines the slope of the floor and sends the data to the motherboard. Such correction shall be recorded and calculated before the test results are displayed.