Rapid Screw Extractor (2 In 1) Green

(0) No Reviews yet
$‎17.39 $‎48.70
SKU: DBZ60G

Low stock, order now!

Back

Details

2 in 1 Screw Extractor, time-saving rapid removal
  • No pre-preparation required !!
  • 1st bit requires no hammer. Simply press down on the screw & twist it out !!
  • 2nd Bit features a sharp blade that is hammered into the stripped screw recess.
  • High-torque handle grip - standard 6.35mm (1/4") hex drive





 

1st BIT
Press & Twist !!

4 edges of the cross tip can firmly grip
the remaining corners of Phillips recess.
Screws slightly damaged

Usage

  1. Insert the 1st Bit into the handle grip and grip it as illustrated below.
  2. Place the bit tip into the screw head, then scrape away burs in the recess by twisting it back and forth lightly.
  3. Do not attempt to hit the 1st Bit with a hammer.
  4. After you feel the bit tip catches the corner of recess,
    give a jerk counterclockwise while pressing firmly downward.

 

 

2nd BIT
Strike & Turn !!

Sharp and durable blade can stick into the screw recess easily for secure grip.
Screws heavily damaged or failure with the 1st Bit.

Usage

  1. Clean out any steel chips left in the screw recess.
  2. Fix the rubber sleeve to the 2nd Bit and position the blade in the recess.
  3. Strike the end of the bit with a hammer to stick the blade into the recess.
  4. Make sure the bit is self-standing upright, and then affix the grip onto the bit. 
    ** Do not hit the grip with a hammer.
  5. Give a jerk counterclockwise while pressing firmly downward.
Applications

Back

Ratings & Reviews

No reviews available

Be the first to Write a Review