Laser Labs, Tint Meter, Inspector II, 0 - 100% range

Overview:

Introducing the new Inspector II Tint Meter. The Inspector II has the same features, auto-calibration, and proven accuracy of all Laser Labs, Inc. products. It works on all windows up to half an inch thick. Perfect for inspection stations.

Functionality:

• The Inspector II works on all windows. Holding both sides together, turn them on. Then put the back meter onto the inside of the window, either holding it in place or using the suction cup. Put the front meter on the outside of the window over the back meter, and it displays the light transmittance value.
• Be sure to avoid placing the detector area over the defrost strips on back windshields.

Smaller, lighter, more durable:

• The Inspector II is far smaller in size but works just as well, with built in protection from false readings and misuse.
• New Design, better Technology, same functions:
• The Inspector II is a small, very useful tint meter. It can measure tint levels on any auto window at any time of day or night.
• Make sure to activate the meters BEFORE placing them around windows to avoid misreadings.

LED Source:

• Laser Labs, Inc tint meters use a light at 550nm to measure total light transmittance.
• The bandwidth of 50nm spans the general range of visible color.

Measurements Range:

• The measurement reads out a value between 0% (opaque material such as cardboard) and 100% (pure air).
• All Laser Labs, Inc tint meters are accurate within plus or minus 2% and are not affected by humidity or stray light. They are reliable from 0º to 100º F, day or night.
• Two NIST traceable reference samples are included with each meter. The lighter sample is high transmittance (65% to 80%), and the darker sample is low transmittance (20% to 35%).

Battery:

• The Inspector II runs on two CR2032, 3V coin cell batteries which are included. They are good for 4000 uses and have a ten years’ shelf life. Purchase replacement batteries at your local hardware store, convenience or online store.

What's Included:

Two N.I.S.T. traceable reference samples
User manual
Certificate of Accuracy
Carrying case
Tint law card

Specifications:

• Measurement Range: 0% to 100%
• Temperature Range: -18° to 38° C
• Testing Time: 1 second
• Effect of stray light: Not affected
• Power source: 2 Lithium CR2032, 3V battery (included)
• Weight: 90g
• Dimensions: 95 x 45 x 30mm